Purple Horn Handheld Laser Welding Machine For Stainless Steel Metal

(1) The heat input can be reduced to the minimum required amount, the metallographic variation range of the heat affected zone is small, and the deformation caused by heat conduction is also the lowest.

(2) The welding process parameters of 32mm thick single pass welding have been verified as qualified, which can reduce the time required for thick plate welding and even save the use of filler metal.

(3) There is no need to use electrodes, and there is no concern about electrode pollution or damage. And because it is not a contact welding process, the wear and deformation of the machine can be minimized.

(4) The laser beam is easy to focus, align and be guided by optical instruments, can be placed at a proper distance from the workpiece, and can be guided again between the machines and tools or obstacles around the workpiece. Other welding rules cannot be used because of the above space restrictions.

(5) The workpiece can be placed in a closed space (under the control of vacuum pumping or internal gas environment).

(6) The laser beam can be focused on a very small area and can be used to weld small and closely spaced parts,

(7) The range of weldable materials is wide, and various heterogeneous materials can also be joined with each other.

(8) It is easy to carry out high-speed welding automatically, and can also be controlled by digital or computer.

(9) When welding thin materials or thin diameter wires, there will be no reflow problem like arc welding.

(10) It is not affected by magnetic field (arc welding and electron beam welding are easy), and can accurately align the weldment.

(11) Two metals with different physical properties (such as different resistance) can be welded

(12) No vacuum or X-ray protection is required.

(13) If piercing welding is adopted, the depth to width ratio of weld bead can reach 10:1

(14) The unit can be switched to transmit the laser beam to multiple workstations.